DIY Lulzbot Wiper Pads

Per the outline in the Lulzbot whitepapers on the topic of producing wiper pads, you can produce these yourself very cost-effectively.

1. Buy Mcmaster part# 88085K311
2. Print out both STL files
3. Put a Stanley "1992" trapezoidal razor blade in the recess of the print.
4. Clamp the two prints together with 1-3/4" or longer UNF 10-32 screws and hex nuts.
5. Use a pair of shears, scissors, or a hobby knife to cut a 3-inch long v-notch in the middle of one end of the felt.
6. Feed the cut