Anet A8 Heat Block Sock

My version of DIY Heated Block Sock.
A form was printed with 0,1mm layer thick and 100% infill.
Don't forget to smear inside with vaseline.
Recipe for silicone: corn starch + high temp silicone.
On Youtube you can see how to mix it:
https://www.youtube.com/watch?v=r2sjGIhs5hE&t=145s

You also need:
2 screws M3x25mm
2 screws M3x10mm (at least 8mm)
2 flat head screws M3x6mm
2 washers
4 regular nuts or wing nuts

After a mold is cured, you'll need to trim it a bit, and cut a hole on t