3 Axis Camera System

A Camera Arm that can be controlled using an Arduino CNC Shield and uses 3 NEMA stepper motors.

READ EVERYTHING BEFORE COMMITING TO A BUILD
Can be configured with a variety of motors:
-NEMA 17 Direct Drive
-NEMA 23 Direct Drive
-NEMA 17 4.16:1 Gearing

Additional Hardware Needed:
- 6 608 size ball bearings. Preferably sealed or shielded type.
- ~300mm of 8mm shaft. Cut to 130, 55, 100mm lengths
- 1/4-20 or 3/8-16 nut, depending on which mount you need to print.
- 1/4-20 x 1 inch he