Owl Filament Spool Holder

This is currently my filament holder.

You need:
1 x filament spool as floor
2 x flange ball bearings F 628 2RS / F628 2RS / 8x24x8 mm
3 x washers
3 x M8 nuts
1 x M8 threaded rod

The length of the threaded rod depends on the spools you use.

The connector part which is pressed into the spool and serves as a support cannot be used for every spool ("holder_on_spool.stl"). Please measure the inner hole beforehand and adjust the model :) Sorry for the effort.