Thingiverse
Aldi Bikemate Bicycle Repair Stand Replacement Leg Bracket
8
Downloads
1
Likes
0
Makes
I made a replacement bracket for my Aldi Bikemate Bicycle Repair Stand.
It is meant to be much stronger than the original bracket.
It's a pretty straightforward piece, a rectangular base, two 90° brackets with a 8mm hole, and a recess in the base to clear the corner of the leg in the [0°, 90°] range of angles. It also has a 8mm hole on the base for pegging/bolting it to the floor.
I recommend printing with 100% infill and/or 5 shells.
The project is also available on my [GitHub](https:
It is meant to be much stronger than the original bracket.
It's a pretty straightforward piece, a rectangular base, two 90° brackets with a 8mm hole, and a recess in the base to clear the corner of the leg in the [0°, 90°] range of angles. It also has a 8mm hole on the base for pegging/bolting it to the floor.
I recommend printing with 100% infill and/or 5 shells.
The project is also available on my [GitHub](https:
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in