K40 Laser Cutter Drag Chain Mount

Holds a 10x15 drag chain to the laser head carriage so the air assist hose and any laser pointer wires are contained properly.

I used a 10x15 drag chain purchased from Amazon( Black Plastic Drag Chain Cable Carrier 10 x 15mm for CNC Router Mill http://a.co/14wD5dQ ). I swapped out the two short m3 screws for a couple of m3x8 screws I had. If you have longer those should work too since the standoffs on the carriage are deeply threaded. So m3x10 or even m3x12 should be fine.

To hold the dra