Thingiverse
Wanhao D7 Bed leveling 2.0 Triple Tree
by tonycstech
37
Downloads
24
Likes
1
Makes
https://youtu.be/J6ba14lB8JQ
Need 3 bolts
1/4 X 1-1/2 long with 3 matching nuts
3 springs about 1" (25mm) long that would fit thru those bolts.
When calibrating, those nuts get tighten very lightly. Freely spin them until they encounter ANY resistance.
For that reason, nuts must spin freely on those bolts all the way thru.
1 screw for wood (construction screw) Longer then 1/2 (10mm) but no longer then 1" (25mm)
1 3/8 X 1/2 long bolt with matching nut
Those are for the top.
Need 3 bolts
1/4 X 1-1/2 long with 3 matching nuts
3 springs about 1" (25mm) long that would fit thru those bolts.
When calibrating, those nuts get tighten very lightly. Freely spin them until they encounter ANY resistance.
For that reason, nuts must spin freely on those bolts all the way thru.
1 screw for wood (construction screw) Longer then 1/2 (10mm) but no longer then 1" (25mm)
1 3/8 X 1/2 long bolt with matching nut
Those are for the top.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in