Tablet Arm

Modified to use M6 bolts and nylon lock nuts.

I printed with 3 perimeters at 50% infill with PLA .4 nozzle and 1.5 layer height. The swivel head is the only part that needs support to print and likely just build surface support at that, I printed all at once with full support tho :)
I used 3m VHB to stick the tablet on.

You will need:
2 x 65mm M6 Hex Head Bolt
2 x 35mm M6 Hex Head Bolt
4 x Nylock M6 Nuts

Optional 4 x Traxas body washers #1815

I built it primarily to use an and