Thingiverse
Spinner 60mm for ME BF 109 F/G
by FLesch
23
Downloads
21
Likes
0
Makes
Hardware: nozzle diameter 0,4mm
Software: nozzle diameter 0,8mm
Layer Height: 0,25mm
The spinner needs 2mm massive-print and the rest must be a spiral vase. Use cooling.
The plates need massive-print with 100% infill.
Cut out the hole for the prop with an soldering iron.
It is designed for PT 3x6 screws with torx.
The rips give a good stabilisation.
Software: nozzle diameter 0,8mm
Layer Height: 0,25mm
The spinner needs 2mm massive-print and the rest must be a spiral vase. Use cooling.
The plates need massive-print with 100% infill.
Cut out the hole for the prop with an soldering iron.
It is designed for PT 3x6 screws with torx.
The rips give a good stabilisation.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in