Thingiverse
3,5'' home automation console with Raspberry Pi Zero WH
by esra
92
Downloads
60
Likes
0
Makes
Here my console for my expanding openhab home automation.
It is based on a waveshare RPi 3.5inch LCD and a Raspberry Pi Zero WH.
You need no soldering, as long as you find a not so huge micro-USB-Plug.
You can print the main body in up right position.
Passepartout comes extra. Could not avoid it, but on the other hand you can now have a two color design.
Update, 17.06.2018:Finally the back lid/door is available now.
I use four neodymium magnets with 4mm diameter and 1,5mm height to
It is based on a waveshare RPi 3.5inch LCD and a Raspberry Pi Zero WH.
You need no soldering, as long as you find a not so huge micro-USB-Plug.
You can print the main body in up right position.
Passepartout comes extra. Could not avoid it, but on the other hand you can now have a two color design.
Update, 17.06.2018:Finally the back lid/door is available now.
I use four neodymium magnets with 4mm diameter and 1,5mm height to
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in