Thingiverse
Anet A8 Filament Bridge Guide
by shumihazai
28
Downloads
19
Likes
0
Makes
This is a filament guide for the Anet A8.
Useful for bridging the filament over the left shoulder of the printer to avoid contact with the acrylic frame. One side can flex a little to reduce tension during jerk movements along the x-axis.
If the rings came out rough, a little bit of sanding of the inside diameter may be required.
Make sure to rotate the model flat in your slicer before printing.
If you have a spare bearing, you can check my other filament guide design:
https://www.thingiv
Useful for bridging the filament over the left shoulder of the printer to avoid contact with the acrylic frame. One side can flex a little to reduce tension during jerk movements along the x-axis.
If the rings came out rough, a little bit of sanding of the inside diameter may be required.
Make sure to rotate the model flat in your slicer before printing.
If you have a spare bearing, you can check my other filament guide design:
https://www.thingiv
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in