Thingiverse
Tunnelplan 3D printing Robotic Arm AR2/eDO
by tunnelplan
97
Downloads
81
Likes
0
Makes
August 14, 2018
Today, the aluminum parts, the bearings and other mechanical parts have arrived by post.
July 27, 2018
Ordered aluminum parts at https://www.anninrobotics.com/
May 20, 2018
All parts have arrived.
Continue with the assembly of the robot arm on the track and the control box.
05 May 2018
Waiting for the last bearing and the last belt.
Adjust the hole in the arm (15 mm) for the transmission and used transarm stiffener.
Used an old 1 inch steel tube with a carbon tube
Today, the aluminum parts, the bearings and other mechanical parts have arrived by post.
July 27, 2018
Ordered aluminum parts at https://www.anninrobotics.com/
May 20, 2018
All parts have arrived.
Continue with the assembly of the robot arm on the track and the control box.
05 May 2018
Waiting for the last bearing and the last belt.
Adjust the hole in the arm (15 mm) for the transmission and used transarm stiffener.
Used an old 1 inch steel tube with a carbon tube
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in