Y Axis Pulley Holder Tensioner

This was designed to be used with my homemade 3D printer, but you should be able to use it on any other printer as long as you can attach it properly.

You will need:
Three #6-32 x 1 inch screws
Three #6-32 Nuts
A Pulley that fits in the hole
Two screws to attach it to your printer (measure the hole size after printing and then get the screws that fit. I found that due to PLA shrinkage the hole dimension changes)

https://www.youtube.com/watch?v=r11hIzN4Pkk