Helicopter toy

I printed with PETG, there was a spiderweb (snot). And the blades fused with the body.
If you print ABS or PLA, it should get better and smoother.
For the blades and tail, support is needed.
I set the distance by the z-axis between the support and the detail of 0.5mm, then it is easily removed.
The design is completely original. Created in tinkercad: https://www.tinkercad.com/things/0y80rMt4uun-helicopter-toy

I printed with a nozzle 1.0mm, resolution of 0.2mm.
If you have a nozzle 0.4mm,