Pi Case Stand

Bracket and legs for the Pi Case made by Luc_E (this one: https://www.thingiverse.com/thing:1585924)

I made the legs in the form of the point of origin symbol for earth from Stargate SG1.

You'll need to print 2 brackets and 2 legs.

This adds about 3mm to the thickness of the back so you'll also need screws that are ~3mm longer. The M3 x8 screws might make it, but M3x10 would probably be better.

I recommend printing in ABS or PETG. PLA is a bit too stiff for the snaps to slide in w