Thingiverse
Tesla Lug nut Cover
by Nick_White
27
Downloads
25
Likes
0
Makes
Lugnut cover for the Version 2 tesla lugnuts.
21 mm internal diameter
1.4225 cm tall(the section that goes around the lugnut)
Tesla logo on front.
make sure that the first layer is not too close to the bed or else the logo will not look good.
Tested on other vehicles with 21mm lug nuts, but never tested on Tesla. If you try to print it and you have a Tesla, please let me know if it works.
I recommend using the 98.7% scaled shorter version of the cap, as it does not protrude as for
21 mm internal diameter
1.4225 cm tall(the section that goes around the lugnut)
Tesla logo on front.
make sure that the first layer is not too close to the bed or else the logo will not look good.
Tested on other vehicles with 21mm lug nuts, but never tested on Tesla. If you try to print it and you have a Tesla, please let me know if it works.
I recommend using the 98.7% scaled shorter version of the cap, as it does not protrude as for
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in