Popper lure with printing base

I had trouble securing the original print to the bed so I added a base for printing stability which will need trimming when finished. I also opened the hole down the center for slightly larger wire. ( 0.50 x 8" )

Please don't forget to tip if you can, Thank you in advance ;)

note*** This popper is 1.5" wide x 7.0625" long. (file name is my version not size!! )

Top and bottom print setting / concentric.
PLA with 40% honeycomb infill, 2/0 hooks and hardware these weigh 2.33 oz or 66