Lamp shade

This cover is designed for the lamp on the clothespin, which is sold for 300 rubles. The outer diameter of 85 mm with a wall of 2 mm. 81 mm diameter is Obtained for planting. The lamp was 62 mm in diameter. I took divided 62 by 81 to get 0.7654. In the slicer you need to adjust the scale at 76.54! Under your lamp, do the math! Had to finalize the boron machine due to the fact that the lamp was not put on! can be done minus 2 mm! I flattened it in a slicer too! printed transparent PLA and ABS all