Thingiverse
coin bottle opener / Flaschenöffner
by Naestrahan
320
Downloads
338
Likes
6
Makes
there are 2 different bottle opener:
"bottle opener normal":
you can print it with 100% infill or you can do this: print the first 3 mm and the last 3 mm without bottom layers and top layers (bottom layers=0). Choose 30% honeycomb infill.
For the 4 mm in the middle of the bottle opener you choose 100% infill. If you do so, you have a nice looking honeycomb look with a strengh core inside.
"bottle opener with holes":
this should be printed only with 100% infill.
If you are interested:
"bottle opener normal":
you can print it with 100% infill or you can do this: print the first 3 mm and the last 3 mm without bottom layers and top layers (bottom layers=0). Choose 30% honeycomb infill.
For the 4 mm in the middle of the bottle opener you choose 100% infill. If you do so, you have a nice looking honeycomb look with a strengh core inside.
"bottle opener with holes":
this should be printed only with 100% infill.
If you are interested:
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in