Thingiverse
Choke knob and control arms for DLE and similar RC gas engines
by tfrancis
16
Downloads
7
Likes
0
Makes
Various choke solutions for DLE and similar gas RC motors
The choke knob r3.stl and choke r3.stl need to be connecred together via a 2.5 to 3 mm wire bent to 90deg at each endthat is glued into place
The levers (control arms) can be used with a servo or manual control rod, the rod size is 2mm
The choke r3.stl and the levers use 2mm bolts to connect to the carburator, 2.5mm can be used but will need to be drilled out.
The levers can be used on some throttle setups as well but may need to be
The choke knob r3.stl and choke r3.stl need to be connecred together via a 2.5 to 3 mm wire bent to 90deg at each endthat is glued into place
The levers (control arms) can be used with a servo or manual control rod, the rod size is 2mm
The choke r3.stl and the levers use 2mm bolts to connect to the carburator, 2.5mm can be used but will need to be drilled out.
The levers can be used on some throttle setups as well but may need to be
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in