Light Ring for 65mm CNC Spindle

This is a simple ring to which you can glue a 70mm led ring (easy and cheap to find on eBay.)
The mount will clamp to the bottom of a 65mm spindle and has vents to accommodate an air cooled spindle.

It requires a 70mm led ring (obviously,) a 1/8" or M3 screw and nut, and a 12v power source.

I printed mine in ABS and used a raft and supports, but whatever you normally do should be just fine. I used E3000 to glue the led ring to the clamp, but again, use whatever you have on hand.