Thingiverse
Raspberry Pi3 2020/3030 Extrusion Mount
by joochung
53
Downloads
33
Likes
2
Makes
This is a simple design to mount a Raspberry Pi3 to a 2020 or 3030 aluminum extrusion.
I would recommend printing 4 spacers. Use the M4 spacer but scale it to 75% so that its a M3 sized spacer in the X and Y directions. I would set the height (Z) of the spacer to 4 or 5mm.
You'll need 4 appropriate length M2.5 bolts - ~ 10mm or so. And 4 M2.5 hex nuts.
I used 2 M5 8mm cap head bolts and 2 printed M5 T-Nuts (Thingiverse has models for 2020 and 3030 extrusions, whatever works for you).
I would recommend printing 4 spacers. Use the M4 spacer but scale it to 75% so that its a M3 sized spacer in the X and Y directions. I would set the height (Z) of the spacer to 4 or 5mm.
You'll need 4 appropriate length M2.5 bolts - ~ 10mm or so. And 4 M2.5 hex nuts.
I used 2 M5 8mm cap head bolts and 2 printed M5 T-Nuts (Thingiverse has models for 2020 and 3030 extrusions, whatever works for you).
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in