Thingiverse
Glider Motor Pod Conversion (removable)
by Opteryx
145
Downloads
126
Likes
0
Makes
This is a motor pod for adding/relocating a motor on an RC glider.
It is designed for motors with a 16 x 19 mounting pattern, and leaves clearance for a propeller up to 10".
ESC sits in the pod.
Tips:
- I strongly suggest using heat set inserts on the mount.
- I suggest printing with 100% infill with 1 perimeter outline, although my first prototype printed at 15% infill with 1 outline has held up.
- Print as pictured with supports added for the pod and pod cap.
Required hardware:
It is designed for motors with a 16 x 19 mounting pattern, and leaves clearance for a propeller up to 10".
ESC sits in the pod.
Tips:
- I strongly suggest using heat set inserts on the mount.
- I suggest printing with 100% infill with 1 perimeter outline, although my first prototype printed at 15% infill with 1 outline has held up.
- Print as pictured with supports added for the pod and pod cap.
Required hardware:
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in