Thingiverse
4 part Classic Rocket for 20x20 Printers VASE MODE
by LNX123
43
Downloads
67
Likes
0
Makes
Print all parts in vase mode. Scale all parts to 9804.11% !!
I got the best results with 2mm layer hight on my e3dV6 0.7mm nozzle.
About 4/5 hours printing time If you increase the speed.
Base1.stl has to have 2 or 3 bottom layers. All the other parts not.
Just use glue on the inside of the parts to cement them together
The hole in the bottom is for home made rockets:
You can make rockets at home for these classic rockets. This design does not have a parachute. (You can add one) I w
I got the best results with 2mm layer hight on my e3dV6 0.7mm nozzle.
About 4/5 hours printing time If you increase the speed.
Base1.stl has to have 2 or 3 bottom layers. All the other parts not.
Just use glue on the inside of the parts to cement them together
The hole in the bottom is for home made rockets:
You can make rockets at home for these classic rockets. This design does not have a parachute. (You can add one) I w
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in