Thingiverse
Mini Talon EDF
by Kriton
39
Downloads
33
Likes
0
Makes
When twin motor Mini Talon is not enough, you can switch to twin EDF! :-)
Design is using wing motor mounts published by Mark Qvale.
Printed in HIPS, mounted with FMS 64mm EDF (4S) and 40A ESC.
Maiden flight done with 2x Zippy Compact 2200mAh 4S batteries to feed those hungry EDFs.
"Tube" and "Blend" can be sliced and printed together as one part.
"Pins" (4x) are used to hold EDF inside "Tube" without gluing. Solid enough and easy to fix.
"Front" can be also fixed by M3x12 screws, but
Design is using wing motor mounts published by Mark Qvale.
Printed in HIPS, mounted with FMS 64mm EDF (4S) and 40A ESC.
Maiden flight done with 2x Zippy Compact 2200mAh 4S batteries to feed those hungry EDFs.
"Tube" and "Blend" can be sliced and printed together as one part.
"Pins" (4x) are used to hold EDF inside "Tube" without gluing. Solid enough and easy to fix.
"Front" can be also fixed by M3x12 screws, but
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in