Woodturning Roughing Gouge Sharpening Jig [SMALL]

How to make it (print it and some other stuff):

How to build it (mount it together):

- 5x30 or better 5x40 hex skrew (blue in the pic)
- 3 x M5 nut (magenta in the pic)
- some kind of head tip, see in "make it" (yellow in the pic)

1. Put one nut in the jig and fix it with some glue. I did use come CA glue. Keep the thread of the nut free of glue.

2. Mount the knob to the skrew. Maybe a washer will be needed. Fix it with a nut if needed.

3. Drill the skrew into the nut in the jig