Thingiverse
Anycubic Kossel Stock PSU Shroud
by Haabilo
21
Downloads
17
Likes
2
Makes
V1.1 Update:
Changed the whole design to be like the stock metal PSU shroud, I didn't find it when I initially modeled so the hole placements were guessed from the PSU.
Also noticed that due to the thinner PSU profile, the hexagonal cutouts don't line up with the C14 plug screws.
Slight modification from my other PSU shroud to fit the stock PSU.
Slightly thinner and screw positions moved.
You will need longer screws, as the stock ones are made for thin metal shroud and won't reach
Changed the whole design to be like the stock metal PSU shroud, I didn't find it when I initially modeled so the hole placements were guessed from the PSU.
Also noticed that due to the thinner PSU profile, the hexagonal cutouts don't line up with the C14 plug screws.
Slight modification from my other PSU shroud to fit the stock PSU.
Slightly thinner and screw positions moved.
You will need longer screws, as the stock ones are made for thin metal shroud and won't reach
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in