VAWT Project

Printed in PETG
.2 layer height
10% infill
No support
Requires 200x200x180 bed. you will need to rotate the blades to fit diagonally on the bed.

when printing all blades I used 8 outline skirt offset by .25mm. This help with bed adhesion.

The number of pieces needed is at the end of the file name. Ex. Center Middle -1


All the parts can be ordered from McMaster Carr

5 - Thrust Ball Bearing Corrosion-Resistant, for 12 mm Shaft Diameter - 6655K76

5 - Clamping Shaft Collar for