Thingiverse
Martian 2 FPV Antenna holder
by Rec0iL_One
5
Downloads
1
Likes
0
Makes
Two small parts to clamp in your VTX antenna in between your frame.
If the hole is to large for your antenna just add some layers of heat shrink around it.
I included different versions for the diameter of the inner tubes that slide on the standoffs.
so for example top535.stl has 5,35 as the diameter of the inner tube.
Depending on your slicer and printer you might want to take one or the other.
Just try which one will fit by printing the top part first so you dont waste filament.
If the hole is to large for your antenna just add some layers of heat shrink around it.
I included different versions for the diameter of the inner tubes that slide on the standoffs.
so for example top535.stl has 5,35 as the diameter of the inner tube.
Depending on your slicer and printer you might want to take one or the other.
Just try which one will fit by printing the top part first so you dont waste filament.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in