C3Dt c Cantilever Printer

Update: it's been pointed out that the Y axis adapter and X axis extruder connector had 15x20mm spacing, most MGN12 rails have 20x20mm spacing. I've added Linear AdapterExtruderAssembly.stl and LinearAdapterYAxis both with the mgn12 20x20mm hole spacing.

These are the STL files that go along with the instructable 3D PRINTER CANTILEVER 2.0 C3DT/C

https://www.instructables.com/id/3D-Printer-Cantilever-20-C3Dtc/

Should you go ahead and take a stab at this one, I'd really appreciate some TI