X-UAV Talon Rear Skid

Here is a rear skid for the full size Talon that is basically a scaled up version of my Mini Talon skid. It is scaled up 1.333 times (133%) and will still fit on a 200mm x 200mm print bed as long as it is printed diagonally. The print parameters I use are:

* Brim - yes, 3mm
* Support - yes, touching bed
* Overhang angle - 70 degrees
* Support infill - 12%
* Print speed - 40mm/sec
* Print Density - 65% or higher
* Target weight - 16g