FT-5 Double 5015 Fang Part Cooler for E3D v6 + BondTech BMG + 713Maker Standard Carriage

↓↓↓Read this first↓↓↓
=========
* **This is a prototype!** It was "designed in a vacuum" as they say so, I can't promise it will work well for everyone.
* This design isn't very serviceable. If you are always tinkering with your hotend, you might not like this.
* If you are printing to use in a warm enclosure, remember to print this in a high temp filament like ABS, PETG, Nylon, etc.
* This is a pretty large part cooler. Make sure you adjust your endstops so your carriage won't crash into t