Thingiverse
ZOHD Dart 1407 12x12mm motor mount adapter
by nkkromhof
15
Downloads
18
Likes
0
Makes
I wanted to build a ZOHD Dart 2s setup with a high Kv motor setup not unlike the Strix Nano Goblin. However, the 12x12mm motor mounting commonly found on 1407 and similar sized motors won't fit the Dart's standard mount.
So I designed an adapter which is about 4mm thick with countersunk holes for the M2 motor mounting bolts that came with my 1407 motor. They are hex bolts with a 2mm thick head, if your screws/bolts have a thicker head than that then you might want to play with the thickness o
So I designed an adapter which is about 4mm thick with countersunk holes for the M2 motor mounting bolts that came with my 1407 motor. They are hex bolts with a 2mm thick head, if your screws/bolts have a thicker head than that then you might want to play with the thickness o
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in