Thingiverse
Tronxy E3D V6 Holder
by WttTmr
30
Downloads
23
Likes
0
Makes
This is the remix of my Holder with part cooling mount. This one doesn't have a cooling mount.
The mount requires 4XM3 nuts and screws for the clamp and the fan. I highly suggest adding spacers.
My first version had slots to drop in the nuts and screw but the PLA kept cracking with the pressure. So this version you have to press in two nuts. for the back (see picture).
The mounting the holes are for M4 screws of the radial fan, but I suggest using some M3 to give you wiggle room.
I've don
The mount requires 4XM3 nuts and screws for the clamp and the fan. I highly suggest adding spacers.
My first version had slots to drop in the nuts and screw but the PLA kept cracking with the pressure. So this version you have to press in two nuts. for the back (see picture).
The mounting the holes are for M4 screws of the radial fan, but I suggest using some M3 to give you wiggle room.
I've don
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in