Thingiverse
Picatinny Battery Box
by ABCDOMG
12
Downloads
2
Likes
0
Makes
Battery Box rail mountable to Picatinny.
Designed for 100x34x15mm Minitamiya batteries with a little wiggle room for one slightly bigger,
Internal measurements 111.5x38.5x18.1, squish at your own risk.
The hole at the top fits a Mini Tamiya connector through just fine, I suggest running the wire through the hole before putting the battery in the box.
Requires a short m3 nut and bolt to close compartment, 10mm suggested.
Requires an m3 nut and bolt to secure to rail, I recommend 3
Designed for 100x34x15mm Minitamiya batteries with a little wiggle room for one slightly bigger,
Internal measurements 111.5x38.5x18.1, squish at your own risk.
The hole at the top fits a Mini Tamiya connector through just fine, I suggest running the wire through the hole before putting the battery in the box.
Requires a short m3 nut and bolt to close compartment, 10mm suggested.
Requires an m3 nut and bolt to secure to rail, I recommend 3
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in