Thingiverse
Lucky Extrusion Gauge
por Kwaad2
133
Descargas
62
Likes
1
Makes
This is a over-under extrusion test gauge.
The theory of it's function is you will print two of the parts, and slide them together. If they are hard to slide together, and the outside warps outward, you are "over extruding".
If the parts are sloppy and loose, when put together, you are "under-extruding".
There 0 clearance between the two parts, so if your printer is on the "not so accurate" side, you might want to accept it a little bit "tight".
When printing, align the seam on the o
The theory of it's function is you will print two of the parts, and slide them together. If they are hard to slide together, and the outside warps outward, you are "over extruding".
If the parts are sloppy and loose, when put together, you are "under-extruding".
There 0 clearance between the two parts, so if your printer is on the "not so accurate" side, you might want to accept it a little bit "tight".
When printing, align the seam on the o
Makes
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesión