Thingiverse
CR-10S 100% Printable Reel Mount Bracket (Including printed Bearing). For reels up to 4.5kg
by Guizboy
17
Downloads
18
Likes
0
Makes
Download the .zip file that contains the STL HD files.
The others are only there for the graphical representation of the system.
The reel on the picture is a 4.5Kg reel.
This system can be used if you have previously reinforced the arch of the Z axis.
Be careful though, the bearing is particularly technical to print.
For example: with too much filament flow, the parts of the bearings will stick together.
The spool holding screw is equipped with a 1/2 turn quick thread to avoid having t
The others are only there for the graphical representation of the system.
The reel on the picture is a 4.5Kg reel.
This system can be used if you have previously reinforced the arch of the Z axis.
Be careful though, the bearing is particularly technical to print.
For example: with too much filament flow, the parts of the bearings will stick together.
The spool holding screw is equipped with a 1/2 turn quick thread to avoid having t
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in