2PAC HUEFORGE

Project: 2pac westcoast.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.51x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA bambulab desert tan Transmission Distance: 0.9 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Grey At layer #15 (1.28mm) swap to Silver At layer #19 (1.6mm) swap to desert tan At layer #21 (1.76mm) swap to Jade White for the rest. POUR CEUX QUI N ON QU UN SEUL AMS PAUSE LIGNE 20NOIR-DESERT TAN