2pac Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 201.46x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used:PLA Kingroon Black Transmission Distance: 0.2PLA BambuLab Basic Brown Transmission Distance: 2PLA Kingroon White Transmission Distance: 4.7This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #9 (0.8mm) swap to BrownAt layer #15 (1.28mm) swap to White for the rest.