2v-1x2-Dome brackets

I am working on building a 2v Dome, and realized that while there is a top angle and adapter to go from the roof peek, that both the angled pieces and vertical members for the door might be useful to have as well. If there is an interest, I'll look into putting together proper corners for the threshold for the door. As it stands, I believe that the design works with just the base brackets for holding things together.

As a note, if you are looking to print something like this for a greenhouse, it would probably be a good idea to plan on printing in PET-G or ABS/ASS instead of PLA. But if you want to experiment with the PLA-Pro, or PLA+, those may work as well. I don't have a lot of confidence in those, especially above shoulder height.

As I build and test things, I'll look into possibly other parts. I can see extending the corner with attachments to the hex hubs on either side of the door frame for example.

Design work in FreeCad. 0.20.x

Enjoy.