2V Geodesic Dome Additions

This is a set of additions for the fantastic [2V Geodesic Dome](https://www.thingiverse.com/thing:2483498) by [Tara Flannery](https://www.thingiverse.com/Tara_Flannery). This enables you to add a window, a door and a base fence for making the dome sit higher.

## Fence/Base

2x4 pieces of wood for the posts (1x4 might be enough too) and 1x4 pieces for the horizontal connecting beams. Use the joint to get just the right angle between the pieces of the base, and the hole guide to pre-drill holes in the right places (middle hole for the post/joint middle screw, side holes for the horizontal beams to screw onto the joint, bit that sticks out is for placing the holes on the vertical beam higher/4in from the ground).

## Window Joint

Print 3 of these and connect 3 B struts to give you a window frame. Add hinges, see below.

## Door

On top of the two connectors provided in the original design, print 2 of the door frame joints to connect the shoulders. For the doors themselves, y