Thingiverse
3.5 inch plus quadcopter frame
von borjos
0
Downloads
2
Likes
0
Makes
This is a frame for a 3.5" FPV quadcopter.
board mount is 25.5x25.5
motor mount is 9x9
there are secondary 20x20 mount holes on the pod for a vtx/vista
recommended parts:
25.5 AIO board with minimum 20A esc
1404 motors (i use 4600KV)
4s 650mAh battery
20x20 VTX to be mounted on the pod (or runcam link/vista like in the photo)
board mount is 25.5x25.5
motor mount is 9x9
there are secondary 20x20 mount holes on the pod for a vtx/vista
recommended parts:
25.5 AIO board with minimum 20A esc
1404 motors (i use 4600KV)
4s 650mAh battery
20x20 VTX to be mounted on the pod (or runcam link/vista like in the photo)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
