Thingiverse
3/8" Nut Implanted PCB Stand Off
door nick_shea
0
Downloads
0
Likes
0
Makes
Added a leg beneath sculler1956's V2 PCB standoffs designed to have a 3/8" nut implanted during a print pause programmed at a height of 1cm. *The height of the nut cavity was extended beyond the hardware's actual height to prevent possible damage of the extrusion nozzle bumping into the nut.*
Before printing, add a print pause around 1cm. For me, printing at a .1mm resolution, this came around layer 103.
To do this in Cura, at the top click 'Extensions' -> 'Post Processing' -> 'Modify Gcode'.
Click the "Add A Script" button.
Select "Pause at height".
It can be a tight squeeze to get the nut seated. I found it best to partially thread in a bolt and wiggle the nut down into place.
Before printing, add a print pause around 1cm. For me, printing at a .1mm resolution, this came around layer 103.
To do this in Cura, at the top click 'Extensions' -> 'Post Processing' -> 'Modify Gcode'.
Click the "Add A Script" button.
Select "Pause at height".
It can be a tight squeeze to get the nut seated. I found it best to partially thread in a bolt and wiggle the nut down into place.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!