Thingiverse
3/8" threaded hose connector
par Peterpan101
101
Téléchargements
70
Likes
0
Makes
A watervalve to hose connector.
The top is designed for a hose with a **12mm** INNER diameter.
The bottom of the connector is **3/8" ISO** pipe threaded.
*
The connector is **waterproof!**
*
Tested and working values:
Layerheights: **0.15** or **0.2** or **0.32** [mm].
Infill: **15** or **20** [%].
PLA temp: **200** [Celsius].
Bed temp: **58** [Celsius].
*
Supports are not needed.
*
The top is designed for a hose with a **12mm** INNER diameter.
The bottom of the connector is **3/8" ISO** pipe threaded.
*
The connector is **waterproof!**
*
Tested and working values:
Layerheights: **0.15** or **0.2** or **0.32** [mm].
Infill: **15** or **20** [%].
PLA temp: **200** [Celsius].
Bed temp: **58** [Celsius].
*
Supports are not needed.
*
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
