3 body problem - Hueforge

This is a Hueforge of the first level as seen in the second episode of the netflix tv show : 3 body problem. Instruction for manual swaps : Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x76.76mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.1 PLA PolyTerra Army Blue Transmission Distance: 0.1 PLA BambuLab Basic Blue Transmission Distance: 2.3 PLA BambuLab Matte Marine Blue Transmission Distance: 2 PLA BambuLab Basic Cyan Transmission Distance: 1.7 PLA BambuLab Matte Ice Blue Transmission Distance: 1.9 PLA BambuLab Basic Jade White Transmission Distance: 3.4This print uses 7 unique filamentsSwap Instructions: Start with Charcoal At layer #10 (0.88mm) swap to Army Blue At layer #11 (0.96mm) swap to Blue At layer #12 (1.04mm) swap to Marine Blue At layer #13 (1.12mm) swap to Cyan At layer #14 (1