Thingiverse
3" FPV Frame
door Tmaxx21
9
Downloads
16
Likes
0
Makes
This is still a work in progress, I have not test flow this design yet.
This is a 3" FPV frame designed around 20x20 electronics, Micro cam (19mm across), 1306 motors and M2 Screws.
There are slots inside the pod for M2 nuts for securing it to the frame and mounting an SMA antenna.
I printed the frame in carbon fiber nylon and plan on printing the pod in the same material. PLA is plenty rigid for a test fit-up and flight but I wouldn't expect it to survive many crashes.
This is a 3" FPV frame designed around 20x20 electronics, Micro cam (19mm across), 1306 motors and M2 Screws.
There are slots inside the pod for M2 nuts for securing it to the frame and mounting an SMA antenna.
I printed the frame in carbon fiber nylon and plan on printing the pod in the same material. PLA is plenty rigid for a test fit-up and flight but I wouldn't expect it to survive many crashes.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
