3 Position Switch

This is a 3 position switch I made for a home project, a fan to be more specific. It uses 2 micro switches as the contacts. Demonstration video on YouTube here: https://youtu.be/Kb2bzrmq4_c

Parts:
1) 3D models
2) 2 micro switches (These can be found in an old microwave oven or online)
3) 1 7.5mm ball bearing or any sphere close to this size
4) 1 9/32"x1/2"(7.12x12.7mm) spring or one close to this size (Adjust the spring spacer model size if spring is to stiff)
5) Super Glue (Liquid type works best)

Note: The spring and ball bearing must be under 8mm diameter or they wont fit. Test the spring and ball bearing before gluing.
There are two types of micro switches in a microwave oven, normally closed and normally open.