Automotive
Go to Model
3 Speed Plus Reverse Real Working Transmission
145
Downloads
118
Likes
1
Makes
This is a 3 speed transmission with reverse. This transmission is designed to work and transmit real power. It uses dog clutches and an H box. I designed this for the latest revision of my steam kart, which will be using an air drill for the engine. The ratios are 3.15:1, 1.25:1, 1:1.6, and reverse is 4.0:1. I have included both straight cut gears and herringbone gear stl files. The shafts are square rods because the dog clutches need to slide on them but still transmit torque, and there's really no other cheap way to do that.
You will also need some hardware:
8x 6-32 x 3/4" screws
2x 5/16 x 1ft threaded rod
6x 8-32 x 1ft threaded rod
2x 3/8in x 1ft square rod
4x 6-32 x 2 3/4in bolts (or 4 pieces of 6-32 threaded rod and 4 6-32 nuts)
5/16 nuts
8-32 wingnuts
1x 5mm x ~40mm bolt and nylock nut, for the reverse idler
8x 6003 bearing (17mm x 35mm x 10mm), Open bearing or SS is preferrable for minimum friction.
2x MR105 bearing (5mm x 10mm x 4mm), for the reverse idler
You will also need some hardware:
8x 6-32 x 3/4" screws
2x 5/16 x 1ft threaded rod
6x 8-32 x 1ft threaded rod
2x 3/8in x 1ft square rod
4x 6-32 x 2 3/4in bolts (or 4 pieces of 6-32 threaded rod and 4 6-32 nuts)
5/16 nuts
8-32 wingnuts
1x 5mm x ~40mm bolt and nylock nut, for the reverse idler
8x 6003 bearing (17mm x 35mm x 10mm), Open bearing or SS is preferrable for minimum friction.
2x MR105 bearing (5mm x 10mm x 4mm), for the reverse idler
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!