30 Cal Plate

I had seen a good number of requests for a 30 cal collator plate, so I decided to teach myself CAD, and here is the result. I used @Match_King's dimensions for the motor drive, and the outside diameter for his collator plates, and went from there. I have confirmed function with a single .311 diameter bullet (its a 123 grain I found), but I haven't tested it with anything heavier, so please give me feedback on that and I'll work on a second plate. 3 walls and 15% infill (I prefer gyroid) should be plenty strong. I'd also suggest adding “30 CAL” to the plate in your slicer, as I couldn't figure out how to do that in Fusion360 (I'm still learning). Oh, I found that the 9MM bullet feed guide (in Match_King's optical sensor) works fine with 30 cal, but if y'all want me to work on one specific for 30 just let me know.