Thingiverse
3000gt Front Subframe OEM Bushing tools
di evanh2002ss
3
Download
0
Likes
0
Makes
Printed from matterhackers build PLA, so, nothing special. 8 Walls, 100% infill.
Use a 1/2" bolt and nut. Regular washer and fender washer on each side. Grease between nut and washers. Grease between bolt head and washers. This will act as a thrust washer and keep it from galling or prematurely wearing the plastic. These are consumable, but the set I made completed all SIX large front subframe bushings. They are for install. I used a press to remove the old ones. I used a 3/8 cordless impact to draw them down.
Use a 1/2" bolt and nut. Regular washer and fender washer on each side. Grease between nut and washers. Grease between bolt head and washers. This will act as a thrust washer and keep it from galling or prematurely wearing the plastic. These are consumable, but the set I made completed all SIX large front subframe bushings. They are for install. I used a press to remove the old ones. I used a 3/8 cordless impact to draw them down.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
